Quality product from Hitec.
HSR-8498HB Servo for Robonova-I Robot use
HSR-8498HB from Hitec was custom designed for the popular ROBONOVA-I robot and is a great choice to use in your next custom robot project. The HSR-8498HB servo uses super strong Karbonite gears that will never wear out or create sloppy gear lash. Another unique feature of the HSR-8498HB servo is that it can be built in three different configurations using the custom accessories included in each package. Build it as a standard servo design, or use the custom "idler wheels to create solid and sturdy robot joints.
Hitec RCD the manufacturer of this servo supplies HSR-8498HB standard in L390 only as a spare unit, If customer wants different length of wire or the wire is from right or left etc, you will need to modify on your own. We can help to modify it before sending to you at low cost, by enquiry.
Pls do mention which position like refer to Robonova-I manual page no. 6&7:
R indicates that the wire comes out from the right, L from left, 200 refers to 200mm wire, 300 refers to 300mm wire and so on and so forth.
-Interface: HMI Protocol, RS-232C Daisy Chain, PWM
-Operating Voltage: 6.0 V
-Stall Torque at 6.0/7.4V (kg.cm) - 7.4/9.0 (102.76/124.98 oz.in)
-Max Speed at 6.0/7.4V (sec/60°) - 0.20/0.18
-Operating Angle: Max 180°
-Weight: 55g (1.94oz)
-Dimension: 40 x 20 x 37 mm (1.57 x 0.78 x 1.45 in)
-Connector Wire Length: 400mm (15.75 in)
Neutral: 1500µs. 0-180°: 1100-1900µs
-Pulse Cycle: 12-26ms (Common: 21ms)
-HITEC Proprietary HMI (HITEC Multi-Protocol Interface) Protocol
-Parameter Setting Capability*
-Data Feedback (Position/Current/Voltage)
-RS-232C Daisy Chain Interface up to 128 Servos
-Flexible Mechanism Design
-Easy to make your robot
-Dual Axis Mount
-Karbonite Heavy Duty Gears
-Dual Ball Bearings
-MOS FET Drives
*Additional HMI Servo Programmer kit required: [PN78206] sold separately.
Replacement Parts & Accessories of HSR-8498HB (Sold separately)
[PN55020] HSR-8498HB Karbonite Gear Set
[PN55014] 1st Metal Karbonite Gear Set (3pcs)
[PN55420] Top, Bottom Cases & Screws Set
[PN55719] Horn & Horn Screw Set
[PN55811] HSR8498HB/ HSR-5498SG Connector Cable 420mm
CAUTION: We do not take any responsibility for any damage or injury caused by improper modification or use of this product.
HSR-8498HB HMI Digital Robot Servo (Karbonite Gear) with
15" servo connector and two circular horns pre-mounted
Horns (2 type):
-0.82" (20.9mm) circular horn (8498-HB1)
-0.82" (20.9mm) circular horn (8498-HB2)
Casings & Screws
(See image below for full content)