1. For charging glow starter or glow heater.
2. DC USB 5V Input; convenient & easy to use
3. Auto-detected and 1.5A peak charge function
4. LED indicates the charge status
SOLID RED: Charging
OFF: Full Charged
1. Connect with 5V USB Input
2. Plug glow starter into this charger, the charger will start charging by 1.5A charge current. The upper LED will show charge status (Solid - Charging / Off - Full Charged).
3. When glow starter is full charged, the LED will go off.
Simply pull it out to stop process.
To start a new charging, please go back to Step 2.
1. Input power is lower than 3.0W, the charger won't work.
2. Input power is higher than 3.0W but lower than 5.0W, the charger can work with lower charge rate.
3. Input power is ample 5.0W or higher, the charger can work normally.