Restricted Goods sold in Singapore only
INSTA-CURE+ Gap Filling Cyanoacrylate / CA Glue
Quality product from Bob Smith Industries Incorporated (BSI), Made in U.S.A.
GAP FILLING is a higher viscosity CA loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas. including those with close fitting joints such as lamination, INSTA-CURE+should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spead the CA out.
Note: Heat and moisture will decrease the shelf life of CAs. Store in cool & dry place. If possible, to prolong shelf life, please store them in glass jar in refrigerator after use.
Insta-Cure+ works BEST on
Balsa Wood, Soft Wood.
Insta-Cure+ works WELL on
Hard Wood, Glass & Metal, Fiberglass, Ceramics, Hard Plastics, Rubber, Laminating, Water-Resistant, Reinforcing.