180W 6-Speed Mini Grinder With Plastic Carry Case, 230V
Suitable for Jade carvings, rc hobby use. For sale at retail store only.
|The rotary tool is a multi-purpose tool which is able to cut, drill, polish, grind, sand, engrave; including many other uses, based on the accessory attached to the collet. It works on a high speed, low torque principle where the revolution can attain 30,000 rpm compare to a typical 2,800 rpm electric drill. The speed combined with the proper accessory does the work. The user simply hold and guide it to task.
1) Includes a range of accessories run to 162 pieces, you'll select and use the different kinds of bistrique fittings.
1) There are a lot of big or small size of sandpaper rolls. They are suit to Polish wood or trim plastics smoothly. They are needed to use with the fixed link of the sandpaper roll.
|8) There are 2 bottles of grinding cream. They are used with woolen polished section.
9) There are 4 chucks. They are used to clamp drill head or grinding heads with different diamertral.
10) There are 10 disk grinding wheel heads. They can groove wood or plastics. They can burnish metal also.
11) There is a oil stone. It is used to grind the active face of the broach.
12) There are 3 fixed rolls of cutting blade and a fixed roll of Polish.
13) There is a slat sand paper, It is suit to pre-burnish surface.
14) There is a chuck locking wrench.
15) There are 5 double wire side large incion slices. They can cut the steel plate easily and they are durable. The diameter is wide (32mm)so it is suit to cut straight line. And small resin incision slice is suit to cut bight line. You should use double wire side large incion slice if you want to cut a hole in the steel plate.
16)There are 66 resin incision slices. The diameters are 24mm. The insin slices are edge tool to reconstractive MOD case. They can incise the computer case's side plate which diameters are less than 3mm. They can chop an artistic design.