Perfect for any iron-on kote, heat shrink film or fabric covering
Quality product by Prolux Hobby Co. Ltd.
Perfect for ironing iron-on kote onto balsa airplanes; any heat shrink film or fabric covering.
Thermal Sealing Iron (Teflon coated), 220V
Safety metal stand
-Using the thermostatic switch to control the temperature which you would like.
-Providing accurate temperature control from 55 to 205 °C (131 to 401 °F) with minimal temperature drfit.
-Perfect for any heat shrink film or fabric covering.
-New iron shoe makes the covering procedure easier.
-Teflon coated shoe prevents scratching.
-Safety metal stand and iron sock included.
-Special TPR material handle design provides comfortable handling - better ergonomics!
How To Use The Thermal Sealing Iron
1-First, please put the iron sock into the shoe. Then, put the iron on the metal stand. And then, place it on the thermal insulation or poor thermal conductivity surface (ex. flagstone, glass table, etc). Turn the temperature knob to " L " and plug the AC power cord to the proper wall outlet (220V). Preheat the iron about 5-8 minutes before using.
2-Please ensure again if the iron sock has been put into the shoe before using. When the preheating process is completed, please adjust and test the temperature by turning the temperature knob slowly till the covering material sticks to the balsa wood smoothly. (You might want to record the time of heating and the position of the temperature knob indicated for future references.)
L : Low (OFF)
L/M : 55°C + 5%
M : Middle 100 °C + 5%
M/H: 140 °C + 5%
H: High 205 °C + 5%