Click for more products.
No produts were found.
Brand:

BSI Insta-Cure+ Super Glue Gap Filling CA (1 oz / 28.4g / 29.5ml) (CLAMSHELL), BSI133H

Reference:
BSI133H

Restricted and flammable item sold in Singapore onlyl.

SGD 9.16
Last items in stock 2 Items
Add to wishlist
Description

Quality product from Bob Smith Industries Incorporated (BSI), Made in U.S.A.

Insta-Cure+™ is a medium viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

 

Works Best On

Balsa Wood

Soft Wood

 

Works Good On

Hard Wood

Glass

Metal

Fiberglass

Ceramics

Hard Plastics

Rubber

Laminating

Water-Resistant

Reinforcing

 

Direction

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Insta-Cure+™ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.

 

Manufacturer's Link

https://bsi-inc.com/hardware/insta_cure_plus.html

Package

1 x Insta-Cure+ Super Glue Gap Filling CA (1 oz)

1 x Extender Tip

Product Details
BSI133H
YOU MAY ALSO LIKE...

Menu

Settings

Create a free account to use wishlists.

Sign in