Click for more products.
No produts were found.
Brand:

[NETT] Titan X50 Heli Kit, Torque Tube Version (Nitro-Powered) w/ 600mm Carbon Main Rotor Blade

Reference:
4856-K10
Limited special offer
SGD 409.35 584.11
Last items in stock
Add to wishlist
Image

Description

Quality product from Thunder Tiger Corp.

 

4856K10 is a Kit (Assembly Required) with Carbon Main Rotor Blade Only.

The 50-class 3D helicopter without limits! With the belt-driven Titan X50B, Thunder Tiger unveiled the ultimate 50-class eCCPM model for all-out, extreme 3D performance. Titan X50 Torque-tube version equipped not only with the powerful upgrades of the X50B, but also with some extraordinary new features.

The key difference, of course, is that X50 has highly efficient, torque tube driven tail rotor. It is perfectly engineered for crisp rudder response and 100% power transfer. Lighter than the original plastic construction, the X50 one-piece, machined metal tail unit remains impressively strong and durable. Experience adrenaline pumping 3D action without any limits - fly the Titan X50.

For instruction Manual (58MB) click here


Specification

Length: 1200mm/47.24"
Width: 200mm/7.87"
Main Rotor Diameter: 1345mm/52.95"
Main Rotor Length: 600mm/23.62"
Tail Rotor Length: 95mm/3.74"
Tail Rotor Diameter: 260mm/10.24"
Gear Ratio: 1:8.5:4.56
Fully Equipped Weight: 3250g/7.16lbs
Tank Capacity: 480cc

 

Features of Titan X50 Torque Tube K10 Kit

Highly efficient torque tube-driven tail rotor delivers crisp rudder response and 100% power transfer
One-piece, machined metal tail case is strong, durable and weighs only 26 grams
Compound carbon/aluminum tail boom adds stiffness and reduces vibration
High precision, under-slung metal rotor head for awesome 3D performance
Each tail rotor grip has a dual radius and thrust bearing, for unprecedented precision and reliability
Lightweight metal tail boom bracket
All shafts are made of heat-treated, hardened stainless steel (10mm main shaft, 7mm feathering shaft, and 5mm tail output shaft)
Lengthened receiver tray for LiPo battery
Includes 600mm carbon main blades


Original  Features from Titan X50B

One-piece Carbon Frames, Slim Profile Design (Only 30mm Wide)
Dual Radial, Single Thrust Bearings Metal Tail Grips with 95mm Blades
Lightweight & Vented Clutch Bell/ Metal-reinforced Ribs
Lightweight & Vented Main & Tail Gear Set Design
Lightweight & Tough Landing Skid
Carbon Base Plate & Carbon Fin
Shrouded-fan for Efficient Thermal Dissipation
Spacious 3-deck Tray for Electronic Devices.
Main & Header Tanks Total Capacity: 480 cc
Equipped with Lightweight Paddles for 3D (20-gram)
+/- 15° Collective & +/- 25° Cyclic Travel




Package
Package Includes

- 1 x 4856-K10 Kit (Assembly Required)
- 2 x Carbon Main Rotor Blades

 

Items required for flying (sold separately):

Radio Control
Radiolink [RL-AT9S] / Hitec [Aurora 9] JR Propo [XG8] or [DSX11] / [DSX7] etc.

Engine
[15550] OS MAX-50SX-H Hyper / [15630] OS MAX-55HZ / [TT9606] TT RL-53H etc

Muffler
[TT9722] THUNDER TIGER Hi-flow 3D Muffler / [HAT566] [HAT521] [HAT522] Hatori Muffler

5 x Servos
Hitec [HS7985MG] or [HS7955TG] for Ali/Ele/Pitch and [HS7965MG] for throttle

LiPo Battery
4.8V NiMH battery, minimum of 1200mAh



Accessories
Hex Starter Tool (the hexagon shaft use to start the heli engine)
Hand Fuel Pump [GH7670]
Glow Starter with Charger, Sanyo 1800mah Ni-CD [PRO2311]
Hyper Pro power starter 12V start up to 90
Gyro
Enya no.3 Glow Plug [Enya3] 
12V battery (use for 12V starter) [FP1272]
Heli Glow Fuel (at least 15% Nitro) [CP15H] / [CP20H] / [CP30H]


Options (sold separately):

[EX1308] Glow Plug Extension (option)
[PN58318] USB Flight Simulator FMS Cable for Hitec/Futaba round/JR (SIC + Hitec Din Adaptor) (for beginner)
[EX1215] Heli Training Bar (For 30-90 size) (for beginner)


Titan X50 Optional parts (sold separately):

PV0106 METAL COOLING FAN,R50
PV0439 M.Tail Pitch Fork,R30/60 (Blue/Silver)
PV0457 METAL TAIL SLIDER, R50/R90
PV1310 X50 FRP CANOPY (Red/Blue/Yellow)
PV1406 METAL UPPER-BRG BLOCK
PV1407 METAL LOWER-BRG BLOCK
PV1408 120° METAL CONTROL ARM
PV1409 140° Metal Control ARM
PV1410 140° CONTROL ARM LINKAGE ROD
PV1413 TAIL CONTROL ROD JOINT
PV1414 METAL STABILIZER CONTROL CAGE




Additional Info

Box Weight without additional carton: 4.2kg
Box Dimension without additional carton: 71x27x14cm

Additional weight/packaging needed for local & overseas shipment.

Product Details
4856-K10
YOU MAY ALSO LIKE...

Menu

Settings

Create a free account to use wishlists.

Sign in